banner
Home » News » Research on Machining Technology of Ceramic Broken Body Engraving Based on Numerical Control Technology-1

Research on Machining Technology of Ceramic Broken Body Engraving Based on Numerical Control Technology-1

Views: 36     Author: Site Editor     Publish Time: 2024-07-11      Origin: Site

Research on machining technology of ceramic broken body engraving based on numerical control technology

Ceramic carving is one of the traditional ceramic art types in China. Its body according to the difference of technology, the carving method can be divided into round carving, pinch carving, relief and engraving carving and half knife clay five categories, in order to through the external expression of the art form, full show the beauty of art and the beauty of nature. But in actual production, traditional manual engraving relies too much on personal technology, and the working environment is harsh and time-consuming.It is difficult to form mass production. Therefore, based on the development of CNC technology intelligence step by introducing numerical control technology into the ceramic body engraving process can give full play to the ceramic body CNC engraving production and processing technology a lot. Technicians use the patterns to be carved by inputting them into the computer accurate artificial intelligence pen to outline one by one, both to avoid manual outline the probability of error greatly speeds up the output of fired porcelain and achieves pottery improve the efficiency and overall quality of porcelain body processing. And, through Leigh with the advantages of modern technology, it can also realize the ceramic industry and the field of science and technology sub-integration, in order to produce ceramic products with high innovation, for revival china's traditional cultural crafts have been endowed with high commercial value.

The processing mechanism of ceramic body

Ceramic body is a kind of brittle material formed by mixing clay, feldspar and quartz after drying, and the raw material ratio is 6:2.5 5:1.5. Among them, clay is the main bonding agent for the forming of ceramic billet, which is responsible for the full combination of feldspar and quartz stone series of poor materials. Feldspar is the solvent component of ceramic body forming, which can effectively reduce the sintering temperature of ceramic body in the firing process and avoid the cracking of the body. Quartz also has a high melting point, which can play a supporting role in the framework of the ceramic body forming process, avoid the expansion or contraction of the body during the sintering process, so as to enhance the wear resistance and stability of the body.

Ceramic body processing is divided into raw material selection, formula fine grinding, high strength iron removal, press filtration, stale, mud, forming, repair, drying 9 steps, and finally form a body suitable for ceramic engraving. For the ceramic body molding, due to the wide variety of ceramic products, the shape and size are also slightly different, the molding method can also be divided into grouting forming method (billet water content ≤38%), plastic forming method (billet water content ≤26%), pressing forming method (billet water content ≤3%) three kinds. The grouting molding method is a common technology in the current ceramic production process, which is divided into cold method (including normal pressure grouting, pressure grouting, etc.) and hot method (namely hot pressure injection method), which is suitable for different ceramic types. Through the processing mechanism of the ceramic body, it can be seen that the ceramic body has it has the characteristics of high brittleness, rough surface and easy stain, and in order to further improve the engraving quality of ceramic body, it can achieve better processing effect through the application of numerical control technology, and provide product guarantee for the sustainable development of China's ceramic processing manufacturing industry.


CONTACT ARTECH

Tel:0086-18764111821

E-mail:admin@artechcnc.com

Add:No. 186-2 , Fuhua Road, Huashan ,

Li Cheng District,Jinan City,Shandong province,

P.R.China

ARTECH PRODUCTS
QR code
Leave a Message
Contact us
CopyRight © Jinan Artech Machinery Co., Ltd ICP:鲁ICP备18018950号-1cnc machines File Download | Privacy Policy